Clover Electronics CDR0850 Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Grabadores de vídeo digital (dvr) Clover Electronics CDR0850. Clover Electronics CDR0850 User's Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 162
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente

Indice de contenidos

Pagina 1 - DIGITAL VIDEO RECORDER

Contents 1 INSTRUCTION MANUAL Stand-Alone 8 Channel DIGITAL VIDEO RECORDER MODEL CDR0850 Copyright © 2007 Clover Electronics U.S.A. All

Pagina 2

Stand-alone DVR Instruction Manual 10

Pagina 3

Stand-alone DVR Instruction Manual 7-6.2. All Manual / Timer recording button ▫ Click the All Manual / Timer recording button in the RECORD menu and

Pagina 4

7. Setup 7-6.3. All Motion ON / OFF, Sensitivity and Velocity Setting ▫ Click the button in the RECORD menu and the ALL MOTION setup pop-up window

Pagina 5

Stand-alone DVR Instruction Manual 7-6.4. All Sensors ON / OFF ▫ Click the button in the RECORD menu and the ALL SENSOR setup pop-up window will b

Pagina 6

7. Setup 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Seconds: Recording Speed) button on each of the channels in the RECORD menu and the Reco

Pagina 7

Stand-alone DVR Instruction Manual 30 25 15 12 10 8 7 6 5 5 3 3 2 2 1 1 NTSC OFF PAL OFF [Fig.7-67 Recording Speed for each channel] 7

Pagina 8

7. Setup 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording), which keeps record

Pagina 9 - About this manual

Stand-alone DVR Instruction Manual 7-6.9. Recording by Motion Detection When the menu of motion properly setup (See section 7-6.3 on page 101 for

Pagina 10 - Instruction Manual

7. Setup ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Motion or Sensor activation. Click the mouse on the PRE in the

Pagina 11 - Unpacking

Stand-alone DVR Instruction Manual ▫ Spot Setup If the “ON” is selected by clicking the mouse on the SPOT button in the MOTION menu, a full screen

Pagina 12

7. Setup - All Clear Click the ALL CLEAR button in the MOTION menu in order to clear the Motion Detection Area, and the window turns to white color

Pagina 13 - Features

1 Unpacking Care should be taken when unpacking to avoid damaging the unit. Please check that the following items are included: ▶ Stand-al

Pagina 14

Stand-alone DVR Instruction Manual By Window Set Click the WINDOW SET button in the MOTION menu on each of the cameras and click one of cells (330 c

Pagina 15 - Installation

7. Setup - Window Clear Click the WINDOW CLEAR button in the MOTION menu in order to clear the Motion Detection Area, and the window you already crea

Pagina 16

Stand-alone DVR Instruction Manual By Each Cell Click the EACH CELL button in the MOTION menu on each of the cameras and click the mouse on each of

Pagina 17 - Specifications

7. Setup ▫ Map View Click the MAP VIEW button in the MOTION menu to view the current settings for Motion detection area. Right-click on the curr

Pagina 18

Stand-alone DVR Instruction Manual 7-6.10. Recording by Sensor (PIR Sensor) ▫ Click the mouse on the button for each of the channels in the RE

Pagina 19

7. Setup ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Sensor activation. Click the mouse on the PRE in the SENSOR menu

Pagina 20 - [Fig 5-1. Front View]

Stand-alone DVR Instruction Manual ▫ Alarm Hold Time Setup The system continues recording for the Alarm HOLD TIME and finishes the recording. Clic

Pagina 21 - [Fig 5-2. Rear View]

7. Setup 7-7. NETWORK ▫ Click the “NETWORK” button in the SETUP menu and the NETWORK menu will be displayed on the screen as shown in Fig.7-94.

Pagina 22 - 5-2. Note for Installation

Stand-alone DVR Instruction Manual [Fig.7-95 IP Mode button] [Fig.7-96 IP Mode pop-up window] 7-7.2. GATEWAY, SUBNET, IP ADDRESS ▫ Click t

Pagina 23 - 5-3. System Connection

7. Setup 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the network viewer. It can be set from 1 to 65535 values

Pagina 24 - 5-4. Installation

Stand-alone DVR Instruction Manual Stand-alone DVR (Digital Video Recorder) Unit CDR0850 is the most reliable and functional embedded DVR system

Pagina 25 - [Fig 5-5. VGA Connector PIN]

Stand-alone DVR Instruction Manual 7-7.4. MAC ID ▫ MAC ID is connecting address for Ethernet, every unit has 12 digit address (HEX 6 byte). MAC ID

Pagina 26 - [Fig 5-7]

7. Setup ▫ IP ADDRESS / PORT DO NOT CHANGE THE IP ADDRESS AND PORT NUMBER IN THE MNS MENU IF YOU DON’T HAVE ANY SPECIAL SERVER TO ACCESS YOUR DVR WI

Pagina 27 - [Fig 5-10]

Stand-alone DVR Instruction Manual 7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM) ▫ Select the DDNS button in the NETWORK menu by clicking the mouse, pre

Pagina 28

7. Setup - alues, click on the OK button. ▫ USER ID USER ID in the DDNS menu and enter the USER ID that is registered to the - ▫ PASSWORD SSWORD

Pagina 29

Stand-alone DVR Instruction Manual 7-7.7.2. Registration to the DDNS server Visit at www.dyndns.org to register. Registration to DYNDNS.ORG 1. Visi

Pagina 30

7. Setup 7-8. VIDEO ENHANCE ▫ Click the VIDEO ENHANCE button in the SETUP menu to enhance the picture quality on each of channels and VGA OUTPUT suc

Pagina 31 - How to operate

Stand-alone DVR Instruction Manual 7-8.1. VIDEO ENHANCEMENT ON EACH CAMERA ▫ Click on an INPUT button in the VIDEO ENHANCE menu. ▫ The CONTRAST an

Pagina 32

7. Setup 7-8.2. VIDEO ENHANCEMENT ON VGA OUTPUT ▫ Click on the VGA OUTPUT in the VIDEO ENHANCE menu. ▫ The CONTRAST, BRIGHTNESS and SATURATION slide

Pagina 33 - 6-1. General Information

Stand-alone DVR Instruction Manual 128

Pagina 34 - 6-2. Operating Interface

129 8 Remote Host Program CONTENTS 8-1. REMOTE PROGRAM OVERVIEW...

Pagina 35 - 6-3. IR Remote Controller

Features ▶ Multi Functional Record -Powerful, multiple Record Modes available: Manual (Continuous), Timer, and Motion Detection Recording. ▶ Us

Pagina 36 - 6-4. Power On/Off

Stand-alone DVR Instruction Manual 8-1. Remote Program Overview The Remote Host Program allows you to view live video, search archived video,

Pagina 37

8. Remote Host Program 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as follows. How to install the p

Pagina 38 - 6-5. Menu Bar On/Off

Stand-alone DVR Instruction Manual 8-3. Internet Explorer When you are trying to use this function, it is highly recommended that the password sho

Pagina 39 - 6-6. Display Screen

8. Remote Host Program • Click on the click here on the following message. This site wants to install the following add-on: ‘SmViewer’ from ‘Clover E

Pagina 40

Stand-alone DVR Instruction Manual 8-4. Remote Host ④ ⑥ ⑤ ③ ② ① [Fig.8-5 SmViewer] 134Buttons of Remote Host Program

Pagina 41 - 6-7. LIVE

8. Remote Host Program 8-4.1. Setup ① ② ③ ④ [Fig.8-6 HOST CONFIG window] ① Version number It represents the current version number of the

Pagina 42 - [Fig. 6-8 SEQUENCING screen]

Stand-alone DVR Instruction Manual ③ Network Image ▫ Size Choose a Size (Resolution) among D1, Half D1 and CIF you wish to display on the SmView

Pagina 43 - [Fig. 6-9 Audio buttons]

8. Remote Host Program 8-4.2. Connection There are two ways to access the DVR through the SmViewer as follows. ▫ With Set Direct setting - Click th

Pagina 44 - [Fig. 6-10 ZOOMED screen]

Stand-alone DVR Instruction Manual 8-4.3. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the SmViewer and the curre

Pagina 45 - [Fig.6-12 OSD OFF SCREEN]

8. Remote Host Program 8-4.4. Speaker / Microphone ⑤ ④ ① ② ③ [Fig.8-10 Speaker / Microphone] Buttons of Remote Host Program ① Audio Input chann

Pagina 46 - [Fig.6-14 PAN/TILT window]

Stand-alone DVR Instruction Manual 14

Pagina 47

Stand-alone DVR Instruction Manual 8-4.5. Copy There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the SmViewer. The recorded

Pagina 48

8. Remote Host Program [Fig.8-12 Copying on the SmViwer] [Fig.8-13 Copy Completion] 141

Pagina 49

Stand-alone DVR Instruction Manual 8-5. PLAYER [Fig.8-14 Player] ⑦ ⑧ ⑩⑪⑫ ③ ④ ⑤ ⑥ ② ① ⑨ Chart. Button of Player Program ①

Pagina 50

8. Remote Host Program ① Status window (Play mode, Date, Time) It indicates the play mode, date and time. [Fig.8-15 Status window] ② Calen

Pagina 51 - [Fig.6-21 VIDEO LOSS window]

Stand-alone DVR Instruction Manual [Fig.8-17 Convert AVI window] [Fig.8-18 Backup Files by Networking] [Fig.8-19 DvrRecData by USB]

Pagina 52

8. Remote Host Program [Fig.8-20 Select one of the Channels] [Fig.8-21 Start Convert Button] How to play the AVI files

Pagina 53 - 6-8. Record

Stand-alone DVR Instruction Manual ④ Search button for Replaying - Click the Search button on the Player and the Browse for Folder will be dis

Pagina 54

8. Remote Host Program 147 [Fig.8-22 Print command window] [Fig.8-23 Print image] ⑦ Division button Select one of the following

Pagina 55

Stand-alone DVR Instruction Manual ⑨ Search slider for replaying The slider can be moved left and right by clicking the slider on the bar and dr

Pagina 56 - [Fig.6-28 Recording Icons]

9 Installation of additional HDDs CONTENTS 9-1. HDD (HARD DISK DRIVE) INSTALLATION...

Pagina 57 - 6-9. REPLAY

3 What to do at the time of Installation Stand-alone DVR should be installed in the following order; 1. Make sure all the required hardware is

Pagina 58 - [Fig.6-31 Calendar window]

Stand-alone DVR Instruction Manual 9-1. HDD (Hard Disk Drive) INSTALLATION ▶ Three of internal Hard Disk Drives (HDD) and a CD R/W or DVD R/W ca

Pagina 59

9. Installation of additional HDDs 9-2. Installation of an additional HDD ▶ Set the jumper setting to “Cable Select” position on the additional H

Pagina 60

Stand-alone DVR Instruction Manual 152

Pagina 61 - [Fig.6-35 Replay screen]

APPENDIX CONTENTS RECORDING TIME TABLE ...

Pagina 62

Stand-alone DVR Instruction Manual Recording time table HDD: 300GB Recording Resolution: Half D1 (720 x 240) Based on 8 cameras

Pagina 63

Factory default settings (1) LIVE SCREEN 8 SPLIT OSD ON (2) TIME / DATE DISPLAY : ON TIME FORMAT : 24 HOUR DATE FORMAT : YYYY/MM/DD (3)

Pagina 64 - 6-10. COPY

Stand-alone DVR Instruction Manual (8) AUDIO AUDIO 1 : RELATED CAMERA CH 1, RECORD OFF, MIC 5 AUDIO 2 : RELATED CAMERA CH 2, RECORD OFF, MIC 5 AUDI

Pagina 65

(10) NETWORK TYPE : DYNAMIC PORT : 113 SERVER 1 MODE : DISABLE SERVER 1 IP ADDRESS : 65.60.84.25 SERVER 1 PORT : 300 SERVER 2 MODE : DISABLE SERVER

Pagina 66

Stand-alone DVR Instruction Manual 158

Pagina 67

FAQ CONTENTS I CANNOT LOGIN ...

Pagina 68

Stand-alone DVR Instruction Manual 16

Pagina 69

Stand-alone DVR Instruction Manual I cannot login ▶ Please check if the link LED of DVR and LAN port of PC are lit. ▶ Please check if the IP ad

Pagina 70 - [Fig.6-45 Copying Icon]

Limited 2Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from sta

Pagina 71

Stand-alone DVR Instruction Manual How to obtain Factory Service z Original purchaser must fill out the warranty card and mail it to the factory w

Pagina 72

4 Specifications ITEM Television System NTSC PALRefresh Rate 60 fields/sec 50 fields/secVideo Resolution 720x480 720x576Video

Pagina 73

Stand-alone DVR Instruction Manual 18

Pagina 74 - 7-1. SETUP

5 Installation CONTENTS 5-1. CONTROLS AND CONNECTORS (FOR 8CH & 16CH DVR)...2

Pagina 76

Stand-alone DVR Instruction Manual 5-1. Controls and Connectors (For 8Ch & 16Ch DVR) z Front [Fig 5-1. Front View] JOGSHUTTLEHDD

Pagina 77 - [Fig. 7-9 Display button]

5. Installation - B a. Display (Full / Split) b. Emergency Record c. Zoom d. Quick Replay e. OSD On/Off f. Audio g. Stop (ESC) h. PTZ

Pagina 78 - SYSTEM CONFIG

Stand-alone DVR Instruction Manual 5-2. Note for Installation  Install the system according to the instructions described in this manual.  T

Pagina 79

5. Installation 5-3. System Connection [Fig 5-3. System Connection] 23

Pagina 80

Stand-alone DVR Instruction Manual 5-4. Installation 5-4.1. Camera Connection ▫ Connection of Normal Cameras Connect the cameras to the Video

Pagina 81

5. Installation ▫ VGA Monitor Connection Connect the VGA Monitor’s connector to the “DSUB 15 Pin Connector” on the rear of the unit. Output for VGA

Pagina 82

Stand-alone DVR Instruction Manual - 5-4.3. Sensor Connection and RELAY IN &OUT ▫ SENSOR Connection (SENSOR IN) Connect the sensor to ALM

Pagina 83

5. Installation 5-4.4. RS232C Connection ▫ Connect the cable to the “RS232C PORT” on the rear of the unit. Specification of the RS232C connector is

Pagina 84

Stand-alone DVR Instruction Manual 5-4.5 Connection to an Ethernet (Optional) Network ▫ Connecting the cable to Ethernet. Our Ethernet connector

Pagina 85

5. Installation 5-4.6. POWER CONNECTION Select proper voltage (see fig 5-12) and connect to a reliable power source. It should not be shared with

Pagina 86 - [Fig.7-24 Overwrite button]

Contents CONTENTS ABOUT THIS MANUAL ...

Pagina 87 - [Fig.7-25 HDD FORMAT window]

Stand-alone DVR Instruction Manual 30

Pagina 88

6 How to operate CONTENTS 6-1. GENERAL INFORMATION ...

Pagina 89

Stand-alone DVR Instruction Manual 32CONTENTS 6-7. LIVE...

Pagina 90

6. How to Operate 6-1. General Information ▫ You can operate all functions of the system by use of the 28 buttons located on the front panel, remot

Pagina 91 - [Fig.7-33 PAN/TILT window]

Stand-alone DVR Instruction Manual 6-2. Operating Interface There are 3 ways to operate the system by pressing the buttons on the front panel or

Pagina 92

6. How to Operate 6-3. IR Remote Controller 1. Record 2. Power On/Off 3. Display format (Split) 4. System status 5. Pan / Tilt 6.

Pagina 93 - [Fig.7-40 DATA BITS button]

Stand-alone DVR Instruction Manual 6-4. Power On/Off 6-4.1. POWER ON On the front panel or the remote controller: Press the POWER button on the fr

Pagina 94

6. How to Operate 6-4.3. APPEARANCE OR DISAPPEARANCE OF POWER BUTTON The Power On/Off button and the Audio buttons (See 6-7.4) as shown in Fig.6-3-1

Pagina 95

Stand-alone DVR Instruction Manual 6-5. Menu Bar On/Off Right-click on the screen in the LIVE or the RECORD mode and the MENU bar will be appear

Pagina 96 - [Fig.7-49 AUDIO menu]

6. How to Operate 6-6. Display Screen 6-6.1. FULL SCREEN [Fig.6-5 FULL screen] CAMERAAUDIOCOPYCURRENTRECORDSEQUENCE 39

Pagina 97 - Record ON/OFF button]

Stand-alone DVR Instruction Manual 6-6.2. SPLIT SCREENS...

Pagina 98

Stand-alone DVR Instruction Manual 6-6.2. SPLIT SCREENS FULL SCREEN SEQUENCING SCREEN [4B] 2nd QUAD SCREEN [4A] 1st QUA

Pagina 99 - [Fig.7-54 RECORD menu]

6. How to Operate 6-7. LIVE 6-7.1. FULL SCREEN ▫ Full SCREEN is available in the LIVE mode or the RECORD mode. ▫ Click on a certain camera’s scr

Pagina 100

Stand-alone DVR Instruction Manual 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mode

Pagina 101

6. How to Operate 6-7.4. LIVE AUDIO ▫ If cameras (up to 4 cameras) have audio function, it will sound in the live mode. ▫ Click the CHANNEL button

Pagina 102

Stand-alone DVR Instruction Manual 6-7.5. ZOOM The image on the screen will be zoomed up to 2 times when the ZOOM button is clicked in the LIVE mod

Pagina 103

6. How to Operate 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click the OSD button on the MENU bar to turn the OS

Pagina 104

Stand-alone DVR Instruction Manual 6-7.7. PAN / TILT ▫ Click the PAN/TILT button on the MENU bar in the LIVE mode to access the PAN/TILT cameras.

Pagina 105

6. How to Operate PAN / TILTCHANNELZOOM / FOCUS [Fig.6-15 PAN/TILT CONTROL window] ▫ Channel Selection and Screen Conversion To ch

Pagina 106

Stand-alone DVR Instruction Manual 6-7.8. SYSTEM STATUS ▫ Click the SYSTEM STATUS button on the MENU bar to see the system status as shown below

Pagina 107

6. How to Operate 6-7.9. POWER LOSS LISTS The list indicates the time/date when the system power is turned OFF. ▫ Click the POWER LOSS LISTS butto

Pagina 108 - [Fig.7-77 All Set screen]

Contents 7-2.1. TIME / DATE ...

Pagina 109 - [Fig.7-78 ALL CLEAR button]

Stand-alone DVR Instruction Manual ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes

Pagina 110

6. How to Operate 51 6-7.10. VIDEO LOSS LIST The list indicates the video loss channel and the time/date when the video signal is disconnected. ▫ Cl

Pagina 111

Stand-alone DVR Instruction Manual ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes.

Pagina 112

6. How to Operate 6-8. Record This system provides Watchdog function. When power goes off during recording and the power turns on, the system will

Pagina 113 - [Fig.7-87 Map View screen]

Stand-alone DVR Instruction Manual The MOTION ( ) and SENSOR ( ) as shown in Fig.6-24 should be turned ON in this recording mode. ▫ Press the R

Pagina 114 - [Fig.7-88 SENSOR window]

6. How to Operate 6-8.4. Timer Event Recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD button in the SETUP men

Pagina 115

Stand-alone DVR Instruction Manual 6-8.5. Recording Icons The Recording Icons depends on recording modes are displayed on the upper left hand corne

Pagina 116 - [Fig.7-93 Spot Setup button]

6. How to Operate 6-9. REPLAY 6-9.1. QUICK REPLAY It is available only by pressing the PLAY button on the front panel or the QICK SEARCH button on

Pagina 117 - [Fig.7-94 NETWORK menu]

Stand-alone DVR Instruction Manual 6-9.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the U

Pagina 118 - [Fig.7-95 IP Mode button]

6. How to Operate ▫ Select the hour on the Start Time Select Window (See Fig.6-32) by clicking the mouse on the Hour (0 – 23 hour) you wish to start

Pagina 119 - [Fig.7-99 Port Setup window]

Stand-alone DVR Instruction Manual 7-6.8.2. Manual Event Recording...

Pagina 120

Stand-alone DVR Instruction Manual 6-9.2.3. Replaying Replaying start time set-up can be possible within a recording time extent. ▫ Replay buttons

Pagina 121

6. How to Operate ▫ How to control while replaying ③ ④ ② ④ ③ ⑤ ⑥ ① [Fig.6-35 Replay screen] ① Search Slider It is possible to play

Pagina 122 - [Fig.7-106 SERVER button]

Stand-alone DVR Instruction Manual the button to view the next frame in still image. ⑤ Speaker ON / OFF Turn speaker ON or OFF. ⑥ Speaker Vo

Pagina 123 - [Fig.7-109 PASSWORD button]

6. How to Operate - Click the mouse on one out of channels during replaying to view a full screen. - Click the mouse on the full screen during repl

Pagina 124 - Registration to DYNDNS.ORG

Stand-alone DVR Instruction Manual 6-10. COPY ▫ Click the COPY icon on the MENU bar, and the COPY window as shown in Fig.6-38 will be displaye

Pagina 125 - 7-8. VIDEO ENHANCE

6. How to Operate ▫ Connect the USB devices to the DVR ▫ Click the SETUP icon on the MENU bar, and the SETUP menu will be displayed. ▫ Click the DIS

Pagina 126 - [Fig.7-111 CAMERA INPUT]

Stand-alone DVR Instruction Manual [Fig.6-40 Copy Start time and Channel Selection window] ③channelselection②HOURselection button①Al

Pagina 127 - [Fig.7-112 VGA OUTPUT]

6. How to Operate [Fig.6-41 Copy Start/End setup buttons] By using the Start/End set-up bar: The starting time to copy can also be set by clicki

Pagina 128

Stand-alone DVR Instruction Manual 6-10.4. Copying the recorded data during replaying The system, CDR0850 allows users to copy the recorded data

Pagina 129 - Remote Host Program

6. How to Operate [Fig.6-44 End Copy Time Setup window] ▫ Choose one among NETWORK, USB, CD and DVD which are ready to copy (See secti

Pagina 130

Contents 9-2. INSTALLATION OF AN ADDITIONAL HDD... 151 APPENDIX...

Pagina 131 - [Fig.8-1 SmViewer icon]

Stand-alone DVR Instruction Manual DVD-RW COPY Save the recorded data on DVD-R/W Medias. Click the DVD-R/W button to start copy. ▫ As soon as o

Pagina 132 - 8-3. Internet Explorer

7 SETUP CONTENTS 7-1. SETUP...

Pagina 133

Stand-alone DVR Instruction Manual 72CONTENTS 7-4. CAMERA ...

Pagina 134 - 8-4. Remote Host

7. Setup 73CONTENTS 7-7. NETWORK ...

Pagina 135 - [Fig.8-6 HOST CONFIG window]

Stand-alone DVR Instruction Manual 7-1. SETUP [Fig.7-1 Setup Icon on MENU bar] It is possible to set up the menus in the LIVE mode and partly i

Pagina 136

7. Setup 7-2. SYSTEM ▫ Click the “SYSTEM” button in the SETUP menu, and the SYSTEM menu shown in Fig.7-3 will be displayed. ▫ Click the “EXIT” b

Pagina 137 - [Fig.8-8 Connect Dialog]

Stand-alone DVR Instruction Manual 7-2.1. TIME / DATE ▫ Click the “TIME/DATE” button in the SYSTEM menu, and the TIME/DATE menu will be displayed (

Pagina 138

7. Setup ▫ DATE FORMAT There are three formats to display the time and date as follow. • MM / DD / YYYY: For U.S.A. • YYYY / MM / DD: For Asian coun

Pagina 139

Stand-alone DVR Instruction Manual 7-2.2. SYSTEM CONFIG ▫ Click the “SYSTEM CONFIG” button in the SYSTEM menu, and the SYSTEM CONFIG menu will be d

Pagina 140

7. Setup [Fig.7-12 Confirmation window of Factory Default] 7-2.2.2. LOAD CONFIG / BACKUP CONFIG You can save up to four different sett

Pagina 141 - [Fig.8-13 Copy Completion]

Stand-alone DVR Instruction Manual 8

Pagina 142 - 8-5. PLAYER

Stand-alone DVR Instruction Manual [Fig.7-14 LOAD CONFIG window] ▫ BACKUP CONFIG This function is to save the current settings to load t

Pagina 143 - [Fig.8-16 Calendar]

7. Setup [Fig.7-16 BACKUP CONFIG window] 81

Pagina 144

Stand-alone DVR Instruction Manual 7-2.3. PASSWORD ▫ ON/OFF Select ON or OFF by clicking the mouse. If the ON is selected, the password has to be

Pagina 145

7. Setup 83 7-2.4. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on eac

Pagina 146

Stand-alone DVR Instruction Manual 7-2.5. FIRMWARE UPDATE There are two ways to update the firmware through USB memory and the SmViewer (GUI). We re

Pagina 147 - 16 Division Screen

7. Setup 7-3. DISK MANAGER ▫ Click the “DISK MANAGER” button in the SETUP menu and the DISK MANAGER window will be displayed (See Fig.7-22). ▫ Clic

Pagina 148

Stand-alone DVR Instruction Manual 7-3.1. HDD WRITE FAIL If HDD is in full and the OVERWRITE on the HDD is turned OFF in the recording mode, the sy

Pagina 149 - CONTENTS

7. Setup [Fig.7-25 HDD FORMAT window] 87

Pagina 150

Stand-alone DVR Instruction Manual 7-4. CAMERA ▫ Click the “CAMERA” button in the SETUP menu and the CAMERA menu will be displayed (See Fig.7-26)

Pagina 151

7. Setup 7-4.1. Camera ON/OFF ▫ Click on each of the channels to select the “O” or “X” in the CAMERA menu. If the “O” is selected, the corresponding

Pagina 152

About this manual This is the Instruction Manual for Stand-alone type DVR model CDR0850. This Manual describes how to install and operate the

Pagina 153 - APPENDIX

Stand-alone DVR Instruction Manual 7-4.3. Buzzer In order to alert users, the Buzzer will sound at that time video signal lost. ▫ Click on each

Pagina 154 - Recording time table

7. Setup 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT button on the corresponding channels in the CAMERA menu and the PAN/TILT window will be displ

Pagina 155 - Factory default settings

Stand-alone DVR Instruction Manual ▫ Pan/Tilt Vendor select Click the “PAN/TILT & REMOTE” button in the PAN/TILT window and the vendor lists

Pagina 156

7. Setup ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT window and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 384

Pagina 157

Stand-alone DVR Instruction Manual ▫ Stop Bits Click the “STOP BITS” button in the PAN/TILT window and select 1 or 2 on the Stop Bits pop-up window

Pagina 158

7. Setup 7-4.6 Display ▫ Click the DISPLAY button in the CAMERA menu and select the ON or OFF. If the “ON” is selected, the camera name (camera tit

Pagina 159

Stand-alone DVR Instruction Manual 7-5. AUDIO ▫ Click on the AUDIO button in the SETUP menu and the AUDIO menu will be displayed on the screen.

Pagina 160 - I cannot login

7. Setup 7-5.1. Camera Channel ▫ Click the Camera Channel button in the AUDIO menu and select up to 4 cameras among CAM 01 through CAM 08 which has

Pagina 161 - Limited 2Year Warranty

Stand-alone DVR Instruction Manual 7-5.3. Microphone Volume ▫ Adjust audio volume by clicking the ▲ or ▼ button. [Fig.7-53 Microphone Volume

Pagina 162

7. Setup 7-6. RECORD ▫ Click the “RECORD” button in the SETUP menu and the RECORD menu will be displayed as shown in Fig.7-54. ▫ Click the (EXI

Comentarios a estos manuales

Sin comentarios